Oxygen in a sample is Supersaturated

From BODDoctor

Revision as of 14:43, 9 October 2007 by ChristopherFair (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

The only time this is a problem is with effluent samples. The reason for this is that the oxygen saturates at some lower value (for example 4 degrees C), then the sample size is extremely large, sometimes as large as 300 mL in a BOD bottle.

Recommendations

  • Warm the sample to about 20 degrees C.
  • Shake the container containing the sample for 5-10 minutes after warming.
Personal tools